How to vacuum pool with sand filter? 4 secret method

Are you excited to vacuum pool with sand filter? Do you know I am so excited to tell you about this? So let’s go for details.

Vacuuming is the only method without a robot-controlled pool cleaner to get rid of not just the gunk that is on the bottom of your pool and the microalgae spores which have failed to be removed by the system that filters your pool and in the process of floating around in your pool’s water and awaiting to grow to live.

Vacuuming the inground pool is an essential maintenance process. Skimmers can only take away dirt and other debris that is floating or suspended on the surface of the water.

In this article, I will explain to you the steps to clean the pool using a Sand filter. You will know how to vacuum in a swimming pool after reading this article.

What Is a Sand Filter and What Does It Do?

There are a variety of uses for Sand filters and vacuums for regular cleaning of pools; therefore, it is crucial to know how they work to maintain the purity of the water. It is used for swimming. 

Knowing what a sand filter is and how it operates is important, but selecting the best vacuum is essential. It is actually simpler than you imagine to keep your pool in good condition as well as free from dirt by following a few easy steps.

A sand filter is made to catch particles and other pollutants that are within the pool water. In the beginning, water passes through the filtering system before going back to the swimming pool clean with all of the contaminants remaining in the sand filter. It is suggested to select a specific type of sand used for these filters.

The most effective method to vacuum pool with sand filter

Are you considering how to clean an above-ground pool with a Sand filter? This pool vacuum has a circulation pump along with the vacuum force. It is present within the lines of the skimmer vacuum plate is utilized. 

When the vacuum is created by the circulation pump, then it is able to pull water at a positive pressure through the skimmer lines happens, and, at the same time, under low pressure, the water flows into the pump. Then, via the return lines, the water is being pumped back into the pool through Sand filters. 

When the vacuum hose has become filled with water, there is a skimmer valve that is fitted with a press. The skimmer basket draws water using the tool for vacuuming, sucking it up, and cleaning off dust, dirt, debris, and so on. Occurs with the help of the moving roller inside the vacuum head. 

The vacuumed particles are transported to the intake of the skimmer. They then go to the pool pump and then to the sand filter.

How to Use Vacuum Cleaners in Swimming Pools With Sand Filters?

Cleaning an inground pool is an essential maintenance process. Skimmers can only remove dirt and other large debris that is floating or floating within the pool. 

Contaminants that sink to depths of the water or remain on the sides of the pool cannot be eliminated by skimming. Most of the time, these particles are brushed off the sides and bottom and then stirred up until they can be cleared gradually through more than one skimmer. 

But there are times when only vacuuming can completely vacuum the pool, especially when you need results quickly. A pool vacuum could be utilized with two valves on the sand filter. It depends on the number of particles present within the pool.

The Vacuum Method

A typical pool vacuum makes use of the vacuum force that is present within the lines of skimmer baskets. The vacuum created from the circulator pump forces water through the skimmer lines and then back to the pump at negative pressure.

This water then gets pumped at high pressure into the filter and is returned to the pool by returns lines. Once the cleaning pipe has been filled up with water. And it is then the hose is pressed-fit to the skimmer’s inlet.

When the skimmer is pulling in water, it passes through the tool. The vacuum head rolls across the sides and bottom in the water, absorbing dirt and other particles. The vacuumed dirt and debris are carried through the skimmer’s intake to the pump and later to the Sand filter.

In this case, two options are available for the water that is dirty. It depends on the setting of the multiport valve in the filter.

Multiport Configuration

A multiport filter valve can be set to the following settings: Filter Rinse and Recirculate, Waste, Backwash, and closed. When you vacuum using Sand filters setting, the number of settings is contingent upon what amount of debris or contaminant is within the pool. 

The normal levels of particulates in the pool of a homeowner. It has a normal bather load that is typically removed by the multiport valve set to the filter setting. The water that has been removed from the filter flows through it and back to the pool using return lines. 

Particulates that are sucked up from the vacuum get then removed from the water through the sand bed media in the filter. Because vacuuming can leave an extensive amount of dirt as well as other particles in the sand filtering media, it is a standard procedure to follow the manufacturer’s guidelines. And do an annual backwash of the filter following the vacuuming.

When You Shouldn’t Filter system

In certain circumstances, it’s not recommended to pass the water. It has been vacuumed from your pool to a filter made of sand. 

When the pool’s water is filled with live algae or dirt or dust has infiltrated the pool, which is not being used and created an extensive layer at the bottom of the pool, over-loading this filter could cause the media to become blocked. 

Furthermore, algae that have been “shocked” and killed with high levels of chlorine can pass through the sand filtering media and then re-enter the pool. If chemical treatments, also known as flocculents, are employed to clean the manual pool vacuum. Then vacuum water should not be channeled by the sand filter system.

To Waste The Vacuum

When vacuuming, a sand filter isn’t suggested. The multiport valve needs to be set to waste. When this is set, the filter is shut off, and the vacuumed water flows straight and into the sewer.

If you vacuum to Waste, the level of the pool will decrease rapidly because the water that has been vacuumed is not returning to the swimming pool.

When vacuuming is complete, it is necessary to add water to restore the correct level. The new water addition requires testing and adjusting the pH balance and chlorine levels within the pool.

How to Vacuum an Intex Sand Filter Pool

Swimming pools are becoming more sought-after by American homeowners. Because of the many options and affordable prices of the available types of pools, there are more people than ever who are taking a break and enjoying the outdoors.

While there is a broad selection of swimming pools from small to large, you must be aware of how skimmers are able to only remove debris and dirt that is floating or is suspended on the surface of the water. But, contaminants that sink into the depths of the water or are stuck on the sides cannot be removed through skimming. 

By stirring, these particles can be swept off the bottom and sides. This means that the circulation will slowly rid these particulates of the skimmers.

 However, there are times when only vacuuming can rid the pool of any debris. And provide the results as quickly according to your preference. 

There are one or two valves for the vacuum hose for your pool according to the amount of particulate in the water. The use of an Intex Sand filter to clean your pool is vital for the best water quality for your family and yourself.

Summary

Do you have precise information about how to clean your pool using the sand filter?

Maintaining the health and cleanliness of your swimming pool isn’t easy; however, by following a few simple tips and tricks, You’ll be an expert within a matter of minutes!

Do you know more methods to vacuum your pool? You can share with us the tips for vacuuming the pool.