How to dry a mattress? Top 6 quick steps
A wet mattress is not just uncomfortable but also promotes the development of mildew and mold. And, it’s not a good feeling. Right??? So, now we will know the process to dry a mattress. Ok??
Don’t worry; despite how your mattress became wet, you can dry it by following a simple drying. I have done all the drying methods, and it became completely dry.
To dry a wet mattress as fast as possible, use direct sunlight and air movement. Then put the mattress on a waterproof mattress protector to ensure that when it is wet, you just put the mattress cover into the washer.
Is it possible to ruin a mattress if it gets wet?
The degree to which a wet mattress is damaged depends upon the cause of the flood. Floodwaters and sewage contain bacteria and mold that can make you sick. In this situation, it is best to dispose of your mattress. But, you can clean your mattress in the event that the water comes from a water source that is clean and it hasn’t sat for more than 48 hours.
What are the Things You Will Need to dry a wet mattress?
- Cat litter
- Wet/dry vacuum
- A towel or an absorbent cloth
- Hairdryer
- Extension cords
- fans
- Concrete blocks
When Can You Dry a Mattress?
While you may air dry the mattress, it’s not always secure to do it. The growth of bacteria and mold may occur in mattresses and can be potentially dangerous. This is especially true following storm surge and groundwater flooding or sewer backups. But even water that is clean may eventually lead to mold. This is why it is critical to dry it in the quickest time possible.
Dry and clean if it was wet:
- A sink or bathtub that has overflowing water.
- Rain was acceptable so long as it didn’t touch the ground before.
- Bedwetting
- A burst or leaking water pipe
- Water, beverages, or food that has spilled
But, you must throw it in the garbage if any of the following is real:
- It is not possible to dry it quickly.
- It was soaked by an overflowing toilet, a flooding of the ground, or the sewage backup
- Already, mold is expanding on it
- It’s been wet for over 48 hours.
- The mattress is completely soaked.
6 Steps on how to dry a mattress
Step 1: Remove a mattress topper
If you own an extra mattress, take it off and remove it from your mattress. Attempt to drain the excess water. Don’t spend a long time doing this task. It is possible to clean then dry the mattress with a dryer. If your mattress is water-proof, it is a blessing since your mattress is likely to remain entirely dry.
Step 2: Wipe the moisture from a mattress’s surface
When you have spilled water onto the mattress, then you must make every effort to stop it from being into the mattress as quickly as you can.
The most efficient method of doing this is to soak up the water with materials that have a greater capacity for absorbing moisture. It is possible to bloat the moisture using the help of a paper towel. The Paper is hygroscopic. It is made up of Organic fibers and absorbs more moisture than your bed.
You can also utilize cotton towels; however, ensure that you bloat them without pressing too hard as this could result in the opposite result.
Step 3: Use the absorbents
Cotton and paper towels will help remove any visible liquid. After you have completed the process of removal of the liquid from the surface, employ absorbents to remove as much moisture from your mattress as you can. Absorbents play an essential part when there is a spill. They aid in absorbing the liquid and stop them from spilling on the mattress.
The following are the most prevalent absorbents:
Absorbents for oils: Oil absorbents are recommended if they are in contact with oily liquids. Oils for cooking, motor oils as well as salad dressings contain a lot of fats that can be absorbed by absorbents such as this. A method of drying the mattress after it has been wet is using mats that absorb water made of several layers of polypropylene.
- Cement absorbents:
Many people are aware of an absorbent clay powder. Particularly if you’ve seen the process of using cat litter to clean up spills and you’ve seen that it absorbs water. The only thing you need to do is absorb the liquid using the dry substance, then get rid of it.
The clay absorbents make up one of the more popular oaks that dry due to their lower cost. It is crucial to know that they have the lowest capacity for absorption among all drying methods. They can create huge dust clouds and require a significant amount of effort to get rid of. I would recommend using kitty litter only if you own a dry and wet vacuum.
- Worm castings:
Vermiculite is a mined rock for its numerous applications, including absorption. Most people are aware of the use of sawdust, an additive to soil in the garden, but it could also be utilized to dry out a damp mattress.
- Vinegar :
Soda is a regular household item that you use to absorb water. The primary benefit of soda is that soda is an organic substance that doesn’t leave behind any kind of residue.
Step 4: Take out the absorbent
To clean baking soda and clay-based absorbents such as, for instance, cat litter, make use of a powerful vacuum cleaner. Be cautious not to tip or shake over your mattress since it could cause it to explode in the edges. It is strongly advised to use an individual vacuum nozzle only for betting. A certified house cleaner Maria Threambula gave a piece of extremely useful advice:
“A normal vacuum nozzle is in contact with various sources of bacteria, such as the toilet, floor, or carpets. If you don’t own a specialized nozzle, it is recommended to clean a normal one by using alcohol on it. Additionally, a wet-dry vacuum is more effective in getting the cat litter from your bed. “
It is easy to make your own disinfectant by mixing one portion of alcohol in one part of the water in the form of a spray bottle. Be sure to avoid using dish soap in this manner as it will not be effective in killing all bacteria.
Tip 1
After you’ve removed all the absorbents from your home, you will notice that there may be some dust around the space. It’s a good idea that you open your windows and switch on a cleaner equipped with the HEPA filter to increase air circulation.
Tip 2
If you have children or pets, you should stop them from moving around the bed or getting into the room since they could easily come into contact with chemicals that can be hazardous if they’re consumed.
Step 5: Make use of a hairdryer.
A blow-dryer is an effective tool for removing excess moisture from the mattress. The effectiveness of the blow-dryer is contingent on the mattress type and the strength of a blow-dryer.
The most suitable mattress to dry using the help of a blow-dryer is the pocket spring and hybrid, as the air circulates effectively. Pocket springs are constructed of steel. Pocket springs can rapidly warm up, and the water will start to evaporate.
The most effective kind of blow-dryer is a ceramic hair dryer that is not overheated and has the power to expel moisture. To dry effectively a moist mattress, it is recommended to put the mattress in a vertical position. One side should be facing the window, while the other side is being dried with an air-dryer. This will increase the airflow and prevent the mattress from getting too hot with only a blow-dryer.
Step 6: Create a mold prevention plan
Even if you believe your mattress is totally dry, there could remain some moisture. This could be an issue to develop mold in the near future.
Peroxide of hydrogen:
Hydrogen peroxide is an effective, safe antifungal medication. Place 1% of the concentration in hydrogen peroxide in a bottle, and apply it to a mattress that has become wet. The wet areas should be cleaned and dry those areas of the mattress which remain moist. Repeat this procedure if necessary to ensure there’s no mold or mildew on your mattress later on.
Lime juice:
Natural cleaning solutions can be difficult to find. However, we are fortunate to find lemon juice found in every store. Lemons make an excellent cleaning agent for mattresses since they are rich in acid, which breaks down mold. All you need to do is make 200 milliliters of lemon juice, then mix the juice with 800ml of water. Apply the mix onto the mattress that was damp and let the mixture air dry.
Some Tips to dry a mattress
Even if the outside appears dry, the bed could stay damp in the interior. It is better to dry it thoroughly than let it remain marginally damp inside. Moisture can quickly cause mold and mildew, which could end up harming you and your loved ones’ health.
To make a sanitizing cloth that blocks mold, wash the mattress’s surface with a mixture of half ruby alcohol and half water. Be careful not to oversaturate the mattress, which can make the problem worse.
If you are concerned that your mattress isn’t clean or you’re unable to dry it, and the mattress is costly, contacting an expert restoration service is a different alternative. They are knowledgeable and have the capability to clean, dry, and clean it in a proper manner.
Caution
A wet/dry vacuum, also known as a shop vac, is a fantastic instrument to remove the moisture off damp surfaces like furniture and mattresses, do not make use of a standard household vacuum when drying mattresses. If you expose a regular vacuum to moisture can damage the vacuum or put you at risk of electric shock.
Why should you respond quickly?
Even water that is clean can cause damage to your mattress since the moisture in your mattress expands to cause damage that lasts forever. It greatly increases the chance of your mattress being infested with mites.
Another reason you should be quick is the possibility of mold. The presence of moisture can cause mold to expand. Mold needs to be dealt with care since it can cause allergic asthma, inflammation of the skin as well as hypersensitivity pneumonitis.
The water can cause damage to the metal springs that are inside your spring mattress. The springs in the metal determine how the mattress is capable of rebounding back. The springs could become corroded or rusty, which means they will not be as effective in keeping your spine aligned when you rest. This could significantly decrease the life span of your mattress and cause it to fall more quickly.
These elements indicate that you must act quickly and dry your mattress in the shortest time possible to prevent any lasting harm. This article will help you with methods and strategies to dry your mattress quickly.
What can you do to speed dry a mattress that is wet?
For a mattress to dry fast, you need an unboxed spring mattress that isn’t attached to the frame. Spread it out over an area that has plenty of sunshine and airflow. Set up an air conditioner and dehumidifier, and begin drying it using the blow dryer. For drying mattresses, this is the most efficient and time-saving method. However, please ensure that your mattress is dry prior to using it. The moisture could remain within the mattress, even though the surface is dry. This could lead to mildew and mold.
Which mattress kind dries the fastest?
If you’re looking to dry a mattress that is wet quickly, one of the initial actions to take is to examine the type of mattress. Certain aspects of the construction of your mattress could aid in drying, or contrary to that, cause it to slow down.
The time for drying differs based on the mattress type.
- Latex mattresses:
Like memory foam, latex is a sponge-like material. But, mattresses made of latex are typically heavier and denser as the water doesn’t absorb into deeper layers that resulting in faster drying times. You can utilize an absorbent or wet-dry vacuum agent for a mattress made of latex to dry it.
- Pillow top:
Pillow top mattresses could include both foam and coil structures, which can affect their drying times. The pillow top is usually comprised of fiberfill that is extremely hygroscopic and could absorb most liquids making it easier to dry, particularly in the event that it’s detachable.
- Memory foam:
Super-comfortable mattresses are usually made from memory foam. However, their soft and sponge-like material can be an issue since they are able to absorb water. If you spill liquid onto the mattress of memory foam mattress, it is best to react swiftly to stop it from sinking into deeper layers that will be difficult to remove. Memory foam mattresses typically require the longest time to dry, but they may retain moisture, so it’s best to cover them in a mattress protector to avoid accidents.
- Innerspring:
The majority of innerspring mattresses have an inner core of coils and an elongated comfort layer. This simple design helps with drying time: you only need to dry out a couple of inches of foam rather than an entire mattress.
- Hybrid:
Hybrid beds typically include the coil as the core layer. Apart from giving a hybrid with its distinctive bounce and bounce, the coil layer helps to improve ventilation between different layers, making it more able to dry. In addition, the coils that make up hybrid mattresses are usually covered with a fabric that will also absorb moisture and keep the coils from becoming rusty.
How Long Do Mattresses Take to Dry?
When you adhere to the procedure that was described above, it is possible to dry a mattress that is wet in 6-8 hours. But, it could take up three times as long if using household fans and even one week when you let it dry in the air.
For as long as it is left to dry, the more time it will take for drying, the higher the risk of developing mold and bacteria. Therefore, you should consider renting drying equipment when needed. If not, it’s best to get a new mattress.
Final verdict
I hope this article gives you all knowledge about how to dry a mattress. Now can you dry a wet mattress fast? I know you can.
Remember to act quickly and use diverse methods, such as cat litter and a hairdryer, to produce more efficient outcomes.
Which drying method do you prefer the most? Do share any thoughts you have with me via the comment section below.
